MAT Barriers 

    

Automatic vehicle Barrier

 

Access Control Boom 

The barrier would be installed at an entrance/exit used by vehicles etc. It is renowned for the ability of handling a high flow of traffic.

Description : 
The housing is manufactured from mild steel or stainless steel 3Cr12, epoxy powder coated. Different are colours available on request. The mechanism is housed in the top of the housing, which is easy accessible through a screw-off lid. The door in the front allows easy access to the logics that is housed under the mechanism. A separate mounting base, hot dip galvanised, for easy installation and corrosion protection.

Power:

220V AC 50Hz

Mechanism:

A robust precision mechanism with block bearings is fitted with a 220V torque geared motor for reliable operation and secure locking. The motor and gearbox are enclosed in the same housing and are maintenance free.

Logics:

The logics incorporate one Loop Detectors, additional Loop Detectors available on request.

 

Features:

  • Separate Galvanised-mounting base for:
  • Rigidity
  • Rust prevention on ground surface
  • Ease of installation and maintenance.
  • Torque motor with concealed gearbox (maintenance free)
  • Printed circuit mother board with 11pin base pug in connectors
  • Fuse protection
  • On operation boom pole slows down before it reaches the top position as well as the down position (Mechanically)
  • In event of power failure the boom can be set to either open automatically or stay in the closed position.
  • Durable rubber stoppers are used to land link arm in open and closed position
  • Service door manufactured to give ease of installation but do not compromise strength of automatic vehicle barrier housing (metallurgical balanced enclosure)
   

Spike Barrier

 

The Spike Barrier eliminates unwanted vehicle entry to enter or, forces them into a secured area. This unit will damage the vehicles tyre’s to ensure immobility. The Spike Barrier is placed flush with the road surface and requires drainage points.

  

Specifications:

  • Road blocking with 3-6 meters
  • Time of elevation - 5 seconds
  • Time of folding to de-elevation - 5 seconds
  • Maximum vehicle load - 10 tons per axle
  • Controls can be placed to the left or right hand side of the unit
  • The Spike Barrier is controlled by a torque motor and powered by a standard 220v source.
  • The spikes are manufactured from 8mm stainless steel or mild steel powder coated
  • Restriction height in “road block mode” is 500mm from the road surface
   

Manual Vehicle Barrier

 

The barrier would be installed at an entrance/exit used by vehicles etc. This boom is operated manually at a guard

 

Description:
The frame and catch are manufactured from mild steel, hot dip galvanised and or epoxy powder coated.

Mechanism:
The arm and weight are fitted to roller bearings for efficient operation.ed vehicle entrance/exit.

 

Locking:
The barrier can be locked in the vertical and horizontal position by means of a padlock (excluded). 

 

Construction:

The mounting plate must be fastened to a concrete base by means of 10mm raw-bolts or chemical anchors. A level, flat and solid surface is required for the barrier to operate correctly.

   

Surface mount Cobra Barrier

 

The barrier would be installed at a higher security entrance/exit used by vehicles etc in conjunction with the automatic vehicle barrier. It is renowned for the ability of handling a high flow of traffic.

 

Description:

The housing is manufactured from mild steel or stainless steel 3Cr12, epoxy powder coated. Different are colours available on request. The mechanism is situated inside the barrier housing, which is easily accessible through the lockable door and the screw-off lid.

 

The Spikes cast in tray is manufactured from mild steel, hot dip galvanised and needs to be mounted on a concrete base. The spikes can be made of mild steel or stainless steel brushed finish. The mechanisms of the barrier pole and the spikes are interlinked and will open and close simultaneously. This barrier protects traffic in both directions.

Power:

220V AC 50Hz / 380 VAC 3 phase

Logics:
The logics incorporate one Loop Detectors, additional Loop Detectors available on request.

Mechanism:
Robust precision mechanism with block bearings is fitted with a 220V torque geared motor for reliable operation and secure locking of the spikes in the closed position. The motor and gearbox are enclosed in the same housing and are maintenance free.
Optional 3 phase motor with soft start hi speed operation will be fitted, this unit has a crank handle for manual raise and lower it in case of emergency it also has the facility to lock in the up or down position.

 


Dimensions:
On application

 

Construction:
The Cobra barrier is surface mounted and needs to be on a level surface .

   

Scorpion Barrier

 
  • Quick deployment +-2 seconds
  • Portable
  • 12 Volt Battery operated
  • Remotely controlled from a safe distance 6-100m
  • Manual, electric and radio remote controlled
  • Durable all weather polykeytone pads and stainless steel spikes
  • Spikes need only be raised for target vehicle
  • normal traffic can pass over spike strip unimpeded
  • Perfect for road blocks, military bases etc.